Heat Exchanger Design Condenser Cooling Water Heat Exchanger Water 200kw

Air to Water Chiller 200kw-Shenglin

The heat pump unit is completed also with a 4-way valve, liquid receiver, and one-way valve. 7. Hydraulic circuit built with galvanized pipe, complete with water discharge connection for shell and tube heat exchanger and flange type hydraulic connectors. 8.

Appendix B Heat - Exchanger Design

and its sizing that complies with design speci cations. Conversely, the design Table B.5 Overall heat - transfer coef cients for air - cooled heat (bare tube basis). Process uid U (W/m 2 K) Water cooling 500 Light - organics cooling 400 500 Fuel - oil cooling 150 IUM HEAT EXCHANGER - Termodinamicaium Shell & Tube Heat Exchanger ium Condenser & Evaporator for HVAC Engine Oil Cooler Hydraulic Oil Cooler Fuel Cooler Available in materials suitable for cooling with fresh or salt water. Design Parameters TUBES (Water) SHELL (Air) TEMPERATURE 120°C(250°F) 150°C(300°F)200°C(390°F)

Specifying Shell-and-Tube Heat Exchangers

Industrial organic heat-transfer media 0.001 Refrigerant liquids 0.001 Hydraulic fluid 0.001 Molten heat-transfer salts 0.0005 Acid gas 0.001 Solvent vapors 0.001 MEA and DEA solutions 0.002 DEG and TEG solutions 0.002 Caustic solutions 0.002 Vegetable oils 0.003 Lean oil 0.002 Cooling water Plate Heat Exchangers for Condensation 4" NPT Condensers Furthermore, the cooling water used in the condenser can be passed through once or recycled. When using circulating water, a cooling water tower or cooling pool must be built to re-cool after the water leaving the condenser for reuse. The stainless steel 316L materials of Alfa Heating Brazed Heat Exchanger provide exceptional corrosion resistance.